Pro Bracket Radial from Mickey Thompson is a fast, consistent, reliable, affordable radial for the weekend Sportsman racer.
- Low rolling resistance allowing them to be quicker and faster than the bias ply counterparts
- The rollouts are always the same – no need to “match” tires
- Consistent performance designed for bracket racing
- No tubes required
- Quality + Construction
† High Growth Tire
ACCEPTABLE PRACTICE (EXCEPT ET STREET R, ET STREET R BIAS AND ET STREET S/S) FOR RIM WIDTH IS TREAD WIDTH PLUS OR MINUS ONE INCH.
WARNING: DO NOT USE ON DYNO.
IMPORTANT: ALL BIAS DRAG DRIVE TIRES MUST BE MATCHED TO BE WITHIN 1/2 INCH ROLL OUT.
NEVER USE RIM SCREWS ON RADIAL DRAG TIRES!
MICKEY THOMPSON COMPOUND SELECTION CHART
ST ...... Suggested for manual transmissions (medium compound)
W ...... Extra tread width (please note actual tread and section width on spec sheet)
S ...... Stiff sidewall construction aids in quicker reaction time due to less tire distortion. Also good in high horsepower applications and for heavy cars (Over 3,000 lbs)
R ...... Radial Construction
L2 ...... For Jr. Dragsters
L6 ...... Good for High Horsepower - Boosted Applications
L7 ...... For Motorcycles
L8 ...... Good Compound for General Use
M5 ...... Good Compound for General Use
R1 ...... Special Compound for ET Drag Radial
R2 ...... Special Compound for ET Street S/S, ET Street R & ET Street Radial Pro
X5 ...... Cooler running version of M5
X8 ...... Cooler running version of L8